Specifications
- Operating Voltage: 8-130 V
- Dimensions: mm 50 x 65 x 27
- Electrocal consumption: < 10 mA
The installation of the JHBM is simple: it’s
sufficient to connect the two wires to the battery
terminals. The unit is protected against reverse
polarity.
At the first connection of the battery to a charger, it’s
possible to program the battery information in the
JHBM, directly through the charger user interface:
- Nominal battery voltage: 12-80 V
- Nominal capacity: 0-2000 Ah
- Battery Type: Lead-Acid, GEL, AGM, Li
- Battery ID: 8 character alphanumeric
This data will be saved in the JHBM internal
memory, until the module will remain connected to
the battery.